Pen-and-ink Nevada scene: a Joshua tree and a home with an open service panel on one side, a utility pole and a work van on the other.

Nevada electrical license classes

which Nevada
electrical license
do you need?

C‑2 and its sub‑licenses, side by side, in plain English.

get started

MARKETS WE PLACE THROUGH

the short answer

Nevada licenses electrical contractors under C‑2, and a C‑2 holder may do the work of every C‑2 subclass. Narrower sub‑licenses cover one kind of work, like C‑2f residential wiring, C‑2d low voltage or C‑2g solar, and every license also carries a job size limit the Contractors Board sets.

the Nevada electrical classes.

C‑2 and every subclass under it, in plain words.

C‑2: The full electrical license. It covers the work of every C‑2 subclass below.
C‑2a: Electrical wiring. Installing, altering and repairing wires, fixtures, appliances and apparatus, including wiring on existing structures.
C‑2b: Integrated ceilings. Lighting, related wiring, suspension systems, ducts and apparatus in integrated ceiling systems.
C‑2c: Fire detection. Heat and smoke sensors and alarms, with their related wiring.
C‑2d: Low voltage. Fiber optic systems and systems up to 91 volts, including communications, sound, video, controls, networking and landscape lighting.
C‑2e: Lines to transmit electricity. Overhead and underground secondary transmission lines, with their poles, transformers, substations and equipment.
C‑2f: Residential wiring. Wiring and equipment up to 600 volts in new or existing structures no more than three stories above ground.
C‑2g: Photovoltaics. Residential and commercial solar cells, batteries and inverters. It leaves out wiring past the service panel and systems built only to sell power.
Job size limit: Set by the Board on every license: the most you can contract for on one site or subdivision for one client. It can be raised after a financial review.

Sources: Nevada State Contractors Board, NAC 624.200, NRS 624.220. Last reviewed September 2026.

what to know before
you bid in Nevada.

Scope and size both count.
Your class says what work you can do. Your job size limit says how big a contract you can take. Higher insurance limits don’t raise it, and a certificate can’t stand in for Board approval.
A bond isn’t insurance.
The Board sets a bond or cash deposit for your license. It protects the people you work with, not your business, so damage to a customer’s property is a liability insurance question.

good to know.

Straight answers on Nevada electrical licenses.

What electrical license do I need in Nevada?

Nevada licenses electrical contractors through the State Contractors Board under the C-2 classification. A full C-2 covers the work of every subclass, while sub-licenses such as C-2f residential wiring, C-2d low voltage and C-2g photovoltaics cover one kind of work. Every license also carries a job size limit, so check both before you bid.

Does Nevada C-2d cover all low voltage electrical work?

Not all of it. C-2d covers fiber optic systems and systems up to a set voltage ceiling, including communications, sound, video, controls, networking and landscape lighting. It isn’t a license for general residential or commercial wiring. Other subclasses, like C-2f residential wiring, carry their own limits, so check the exact system against the Board’s current rule.

Does a Nevada C-2 license let me take a job of any size?

Not automatically. Every Nevada license carries a monetary limit, the most you can contract for on one site for one client, alongside its classification. The C-2 scope says what work you can do, and the limit says how big. The Board can raise it after a financial review. Higher insurance limits don’t change it.

Sources: Nevada State Contractors Board, NAC 624.200, NRS 624.220. Last reviewed September 2026.

Insurance words, in plain English: waiver of subrogation · certificate of insurance · additional insured · primary and noncontributory · hold harmless agreement · contractual liability · per-project aggregate · completed operations